Pages: [1] 2
Print
Author Topic: What is this "Junk Yard" all about?  (Read 2322 times)
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 41
Posts: 1258


Dru1487
View Profile Email
« on: Apr 24, 2012 »

This board is an Impulse Junk Yard in a sense. Post in here if you are looking for something small, a screw, an oring, a stock hammer, springs, etc

All parts in here are FREE - buyer pays shipping!

This is open to ALL members who are just looking to help out other I-O members missing a small part
Logged

Lights Out, Camera, Action...
BlacknRed
I-O Moderator
I-O Hero Member
*****
*

Reputation: 13
Posts: 508



View Profile
« Reply #1 on: Apr 24, 2012 »

Nice idea.  I have lots of odd pieces that folks might want.  Stock ram shafts, valves, ram housings, springs etc..  You are a giving kind of guy to think of this....  Hey, wait a minute, what do you want???
Logged
HashaHouse
I-O Jr. Member
**

Reputation: 0
Posts: 27



View Profile
« Reply #2 on: Apr 24, 2012 »

I broke the barbed tip that connects the hose to my lpr, it would be nice to find another one of those.
It would also be nice to find another very small screw that holds the W.A.S eye in place, Ive noticed that it is a little longer then the ones that hold in the cricket eye.
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 41
Posts: 1258


Dru1487
View Profile Email
« Reply #3 on: Apr 25, 2012 »

I def have a WAS eye screw. You're right - they are a little longer. I'll have to check out a barb.
Logged

Lights Out, Camera, Action...
BlacknRed
I-O Moderator
I-O Hero Member
*****
*

Reputation: 13
Posts: 508



View Profile
« Reply #4 on: Apr 25, 2012 »

So the connection you are looking for is on the LPR?  Which type?  I know that the Jackhammer uses a fitting that can be replaced with a Smart Parts EOS banjo fitting.  Not sure which one.  There are two sizes and they are $8.75 on ebay shipped.  I'll figure out the size and post back.
Logged
HashaHouse
I-O Jr. Member
**

Reputation: 0
Posts: 27



View Profile
« Reply #5 on: Apr 25, 2012 »

I broke the barbed fitting off the lpr on the rat I recently ordered from this site, I'm not familiar enough with all lprs to verify the brand.  However I did take the barbed fitting off a jack hammer and it was a perfect fit. I am still one barbed fitting short, lights out, if you find one or even a screw for my WAS eye, let me know and I'll most likely order some other things from you that I have had my eye on, so you can knock it out in one shipping.
Logged
TheImPgoD
I-O Full Member
***

Reputation: 2
Posts: 91


For all you know, I could be a doctor.


View Profile Email
« Reply #6 on: Apr 25, 2012 »

The fitting in question, IMO, is a 10-32 fitting that 3/32 I.D. line goes onto. My favorite would have to be this one for the profile and look, and it's not too expensive.

http://palmer-pursuit.com/cart/index.php?main_page=product_info&cPath=141_1_11&products_id=58

Also, the screw you're looking for is a 2-56 by 1/4". You can order them online if you wish.
Logged

"Have you ever noticed that anybody driving slower than you is an idiot, and anyone going faster than you is a maniac?" - George Carlin

If you cannot excel with talent, triumph with effort.
BlacknRed
I-O Moderator
I-O Hero Member
*****
*

Reputation: 13
Posts: 508



View Profile
« Reply #7 on: Apr 25, 2012 »

That fitting is good and cheaper.  Nice find.
How about a longer noid screw?  Those are real fine.  The first few turns in a body that I bought are stripped and I can't get the noid to snug down.  Probably only a 1/16th inch longer than standard.
Logged
89raider
I-O Full Member
***

Reputation: 4
Posts: 90


View Profile Email
« Reply #8 on: Jan 29, 2013 »

any body know where i can obtain a valve set screw?
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 41
Posts: 1258


Dru1487
View Profile Email
« Reply #9 on: Jan 29, 2013 »

i'm sure I have one. PM me your address and I'll check tonight and get it sent out.
Logged

Lights Out, Camera, Action...
bluedakota98
I-O Full Member
***

Reputation: 4
Posts: 57


View Profile
« Reply #10 on: Jan 29, 2013 »

any body know where i can obtain a valve set screw?

Pretty sure I have one too if lights out doesn't have you covered
Logged
OttawaPaintball
I-O Donor
I-O Full Member
*

Reputation: 3
Posts: 68



View Profile
« Reply #11 on: Apr 12, 2013 »

I'm looking for the 2 c clips that keep your stock trigger pins from falling out, can anybody help me out?
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 41
Posts: 1258


Dru1487
View Profile Email
« Reply #12 on: Apr 12, 2013 »

Pretty sure I have 2. Lemme check.
Logged

Lights Out, Camera, Action...
OttawaPaintball
I-O Donor
I-O Full Member
*

Reputation: 3
Posts: 68



View Profile
« Reply #13 on: Apr 14, 2013 »

Hey Lights Out, did you end up finding any c clips for me?
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 41
Posts: 1258


Dru1487
View Profile Email
« Reply #14 on: Apr 14, 2013 »

yup, PM me your address
Logged

Lights Out, Camera, Action...
Impulse-Owners
   

 Logged
Pages: [1] 2
Print
Jump to:  

Copyright 2009-2013. Impulse-Owners. All rights reserved.