Pages: [1]
« previous next »
Print
Author Topic: little help  (Read 649 times)
ely2000
I-O Newbie
*

Reputation: 0
Posts: 7


View Profile Email
« on: Mar 20, 2011 »
ok so i put my lpr on my rat imp now under rapped fire it seems to have no pressure but bilds up for the first two or three shots. how do i know if lpr is too high or low? i have a gage but it wont fit on the back of the gun, cuz hammer cap sticks out too far. any ideas on what to do or what might be wrong?
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 28
Posts: 907


Dru1487
View Profile Email
« Reply #1 on: Mar 20, 2011 »
Would a 90 degree elbow solve the problem? or is that still get in the way?

sounds like you need to turn up your lpr pressure a little too.
Logged
Lights Out, Camera, Action...
ely2000
I-O Newbie
*

Reputation: 0
Posts: 7


View Profile Email
« Reply #2 on: Mar 20, 2011 »
i will see if i can find a elbow that will fit and as far as psi it should be around 90 or so?
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 28
Posts: 907


Dru1487
View Profile Email
« Reply #3 on: Mar 20, 2011 »
every gun is different, but i would guess 90 is a good ballpark to start.

and this elbow should work for you.

http://www.sakworldpaintball.com/90degsshosad.html
Logged
Lights Out, Camera, Action...
ely2000
I-O Newbie
*

Reputation: 0
Posts: 7


View Profile Email
« Reply #4 on: Mar 20, 2011 »
ok so i found 90 elbow and my lpr is at 90 psi and hp at 170 or so. and still same thing even when i turn the lpr up to 110 or down to 60. the thing that might be doing it is i put the clear tube from my tapeworm on the new lpr kit in the body. is this needed or will it hurt it? i also put the spring in the volumizer's. it sounds more springy now. i think i have just a vision cricket board and dont know how to set the dwell in this one and dont know what its set at.
Logged
ely2000
I-O Newbie
*

Reputation: 0
Posts: 7


View Profile Email
« Reply #5 on: Mar 20, 2011 »
i was in the help page and i came across some thing about plug a hole in the VFF. what is this hole and could this be my problem. cuz when i shoot it the low pres drops down to like 30 or 20 psi.
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 28
Posts: 907


Dru1487
View Profile Email
« Reply #6 on: Mar 22, 2011 »
have you tried a new battery? is your ram assembly cleaned and lubed properly?
Logged
Lights Out, Camera, Action...
ely2000
I-O Newbie
*

Reputation: 0
Posts: 7


View Profile Email
« Reply #7 on: Mar 23, 2011 »
ok i put a new battery in and put the lpr up to where my tapeworm was at and it helped but still a problem.
Logged
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 28
Posts: 907


Dru1487
View Profile Email
« Reply #8 on: Mar 24, 2011 »
what kind of LPR do you have? what are your internals?
Logged
Lights Out, Camera, Action...
Impulse-Owners
   

 Logged
Pages: [1]
Print
« previous next »
Jump to:  

© Copyright 2009-2012. Impulse-Owners. All rights reserved.