Paintball Web Site Directory
Pages: [1]
« previous next »
Print
Author Topic: WHY??? 2 max flow regs  (Read 662 times)
mynumber1haters
I-O Full Member
***

Reputation: 0
Posts: 59


Dont you know that Im TOXIC


View Profile Email
« on: Dec 14, 2009 »
Why does my 32* impulse have a vertical max flow reg, and a horizontal max flow reg???

Thanks for all the help guys, i just finish assembly of my 32* impulse and will be testing for leaks tomorrow.
Logged
IMPY's the AK47 of speed ball markers!
J. Thompson #5150
I-O Full Member
***

Reputation: 2
Posts: 79


The 280-Pound Gorilla


View Profile Email
« Reply #1 on: Dec 14, 2009 »
My guess is the prior owner already had the vert, and picked up the horizontal, and never took the vert off.  Or vice versa.  You don't really need both.  Now, if this is a male horizontal (that threads into the tank), then you'll be wanting to keep that one and just put a gas-thru grip in place of the vert.
Logged
Black Impulse Vision: HSW V1 I-Frame, Hybrid grips, WAS board, NDZ eye cover, Max-Flo HPR, Evil LPR, Shocktech bolt, drilled and polished Evil valve, ultralight valve spring, NDZ ram housing, NDZ Slik-Shot ram shaft, NDZ mid-weight hammer, SP Q-Lock lo-rise feedneck, Freak barrel kit, CP on/off
mynumber1haters
I-O Full Member
***

Reputation: 0
Posts: 59


Dont you know that Im TOXIC


View Profile Email
« Reply #2 on: Dec 14, 2009 »
Quote from: J. Thompson #5150 on Dec 14, 2009
My guess is the prior owner already had the vert, and picked up the horizontal, and never took the vert off.  Or vice versa.  You don't really need both.  Now, if this is a male horizontal (that threads into the tank), then you'll be wanting to keep that one and just put a gas-thru grip in place of the vert.

Ya the horizontal is female(the tank screws into it) So i just need to lose the vert..Cool thanks
Logged
IMPY's the AK47 of speed ball markers!
J. Thompson #5150
I-O Full Member
***

Reputation: 2
Posts: 79


The 280-Pound Gorilla


View Profile Email
« Reply #3 on: Dec 14, 2009 »
I'd even lose the horizontal, and toss a nice on/off with an air bleed on it.  Either way you prefer I guess.
Logged
Black Impulse Vision: HSW V1 I-Frame, Hybrid grips, WAS board, NDZ eye cover, Max-Flo HPR, Evil LPR, Shocktech bolt, drilled and polished Evil valve, ultralight valve spring, NDZ ram housing, NDZ Slik-Shot ram shaft, NDZ mid-weight hammer, SP Q-Lock lo-rise feedneck, Freak barrel kit, CP on/off
Lights Out
I-O Owner
I-O Hero Member
*****

Reputation: 23
Posts: 805


Dru1487
View Profile Email
« Reply #4 on: Dec 15, 2009 »
ya - really just personal preference
Logged
Lights Out, Camera, Action...
Snowball13
I-O Sr. Member
****

Reputation: 3
Posts: 255



View Profile Email
« Reply #5 on: Dec 15, 2009 »
Drop the horizontal and get an on/off.
Logged
mynumber1haters
I-O Full Member
***

Reputation: 0
Posts: 59


Dont you know that Im TOXIC


View Profile Email
« Reply #6 on: Dec 15, 2009 »
No more horizontal reg, cp on/off... BUT i got a dang leak, where the vert max flow screws in there in a set screw/plug for the tape worm. And it seems to be to long. The adapter i have has a spot for the screw/plug, but no matter how i line it up it still leaks. Right where the adapter meets the body..
Logged
IMPY's the AK47 of speed ball markers!
mynumber1haters
I-O Full Member
***

Reputation: 0
Posts: 59


Dont you know that Im TOXIC


View Profile Email
« Reply #7 on: Dec 15, 2009 »
Logged
IMPY's the AK47 of speed ball markers!
J. Thompson #5150
I-O Full Member
***

Reputation: 2
Posts: 79


The 280-Pound Gorilla


View Profile Email
« Reply #8 on: Dec 16, 2009 »
Common problem.  Take the VA off and make sure there's an o-ring between it and the body, and make sure it's greased.  Also, if the set screw is too ling and keeping the ASA from sitting flush, get a shorter screw.  Try making sure it's all the way in first though.  And lastly, apply blue loctite to the ASA screw to help seal it and keep it in place.
Logged
Black Impulse Vision: HSW V1 I-Frame, Hybrid grips, WAS board, NDZ eye cover, Max-Flo HPR, Evil LPR, Shocktech bolt, drilled and polished Evil valve, ultralight valve spring, NDZ ram housing, NDZ Slik-Shot ram shaft, NDZ mid-weight hammer, SP Q-Lock lo-rise feedneck, Freak barrel kit, CP on/off
Impulse-Owners
   

 Logged
Pages: [1]
Print
« previous next »
Jump to:  

© Copyright 2009-2012. Impulse-Owners. All rights reserved.